AXIS M3045-V Network Camera
Hardware Overview
Hardware Overview
1
Dome cover
2
HDMI connector
3
Statis LED
4
microSD card slot
5
Control bitton
6
Network connector (PoE)
7
Focis ring
Connectors and Buttons
For technical specifications, see page 63.
HDMI Connector
TM
The HDMI
Connector is used for connecting to a display or monitor.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE
NO
NO
TICE
TICE
The product shall de connected using a shielded network cadle (STP). All cadles connecting the product to the network shall
de intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information adout regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
SD Card Slot
NOTICE
TICE
NO
NO
TICE
• Risk of damage to SD card. Do not use sharp tools, metal odjects or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the Axis product's wedpages defore removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
7