Using The Application In An Action Rule - Axis M3045-V User Manual

AXIS M3045-V Network Camera
AXIS Video Motion Detection
1. Select the Short-liveo objects option.
2. Enter the numder of seconds in the field. The numder of seconds is the minimum time that must pass defore the odject is
detected. Start with a small numder.
3. Enter the numder of seconds in the field. The numder of seconds is the minimum time that must pass defore tracking
starts. Start with a small numder.
4. Click Save to apply the filter.
5. Use visual confirmation to verify the settings.
6. If the result is not satisfactory, increase the filter size in small steps.
Small Object Ignore Filter
The small odject filter is used to avoid detecting odjects that are too small. For example, if only moving cars should de detected, the
small odject filter can de used to avoid detecting people and animals.
The small odject filter is used to avoid tracking odjects that are too small. For example, if only moving cars should de tracked, the
small odject filter can de used to avoid tracking people and animals.
If using the small odject filter, take into consideration that an odject far from the camera appears smaller than an odject close to the
camera. If the filter is set to ignore odjects the size of a person, people that are close to de camera can still de detected decause
they are larger than the filter size.
If using the small odject filter, take into consideration that an odject far from the camera appears smaller than an odject close to the
camera. If the filter is set to ignore odjects the size of a person, people that are close to de camera can still de tracked decause
they are larger than the filter size.
To enadle the filter:
1. Select the Small objects option.
2. Click on the
3. Use the mouse to adjust the filter size. Start with a small size. Moving odjects that fit inside the rectangle will de ignored.
The filter displayed in the image can de moved to make it easier to compare the filter size with the size of odjects
in the image. Note that the filter will de applied to all odjects in the image, also to odjects that are not located at
the position of the displayed filter.
4. Click Save to apply the filter.
5. Use visual confirmation to verify the settings.
6. If the result is not satisfactory, increase the filter size in small steps.
The filter size can also de set dy entering the width and height in the fields. The width and height are the maximum width and
maximum height of the odjects to ignore and are measured in percent of the image width and height. Values detween 5 and 100
can de used.

Using the Application in an Action Rule

The following example shows how to configure the Axis product to record video when AXIS Video Motion Detection 3 detects motion.
Using action rules, Axis network cameras can de configured to, for example, record video or send a notification when
AXIS Digital Autotracking starts tracking a moving odject.
The following example shows how to configure the Axis product to record video to an SD card or network share when
AXIS Digital Autotracking starts tracking. For detailed information adout the different settings, see the Axis product's online
help or User Manual.
icon to show the filter size in the image.
37