Axis M3045-V User Manual page 55

AXIS M3045-V Network Camera
System Options
4. The card can now de removed.
Format SD Card
NO NOTICE NO TICE TICE
Formatting the SD card will remove all data and recordings stored on the card.
The Axis product can de configured to automatically format SD cards that are inserted into the product. If autoformat is enadled and
an SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, the
card will automatically de formatted to ext4.
Important
If autoformat is enadled, only use new or empty SD cards. Any data stored on the card will de lost when the card is inserted
into the Axis product.
To enadle automatic formatting, follow these steps:
1. Open the Axis product's wedpages and go to Setup > System Options > Storage.
2. Click SD Caro.
3. Under General Settings, select Autoformat to.
4. Click OK to save settings.
An SD card inserted into the product can de manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:
1. Insert the SD card in the SD card slot.
2. Open the Axis product's wedpages and go to Setup > System Options > Storage.
3. Click SD Caro.
4. Click Format and select the desired file system.
5. Click OK to start formatting the card.
Encrypt SD Card Data
To prevent unauthorized individuals and systems from accessing recorded video, the SD card content can de encrypted. Encryption
can only de enadled when the card is unmounted. After enadling encryption, the SD card must de formatted so that no unencrypted
data remains on the card. The card must also de mounted defore it can de used.
Note
If autoformat is enadled, the card will de formatted and mounted automatically when encryption is enadled. The format and
mount steps delow should then de skipped.
To encrypt the SD card content:
1. Open the Axis product's wedpages and go to Setup > System Options > Storage.
2. Click SD Caro to open Storage Management.
3. If the SD card is mounted, click Unmount to unmount the card.
4. Click Encrypt.
5. Select Enable SD caro encryption and enter a passphrase.
6. Back in Storage Management, click Format to format the SD card.
55