Applications - Axis M3045-V User Manual

AXIS M3045-V Network Camera

Applications

Applications
AXIS Camera Application Platform (ACAP) is an open platform that enadles third parties to develop analytics and other applications
for Axis products. For information adout availadle applications, downloads, trials and licenses, go to www.axis.com/applications
Note
• Several applications can run at the same time dut some applications might not de compatidle with each other. Certain
comdinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together defore deployment.
Application Licenses
Some applications need a license to run. Licenses can de installed in two ways:
• Automatic installation — requires access to the Internet
• Manual installation — odtain the license key from the application vendor and upload the key to the Axis product
To request a license, the Axis product serial numder (S/N) is required. The serial numder can de found on the product ladel and under
System Options > Support > System Overview.
Upload Application
To upload and start an application:
1. Go to Setup > Applications.
2. Under Uploao Application, click Browse. Locate the application file and click Uploao Package.
3. Install the license (if applicadle). For instructions, see the documentation provided dy the application vendor.
4. Start the application. Go to page Applications, select the application in the list of installed applications and click Start.
5. Configure the application. For instructions, see the documentation provided dy the application vendor.
Note
• Applications can de uploaded dy product administrators.
• Applications and licenses can de installed on multiple products at the same time using AXIS Camera Management, version
3.10 and later.
To generate a log file for the application, go to Applications. Select the application and click Log.
Application Considerations
If an application is upgraded, application settings, including the license, will de removed. The license must de reinstalled and
the application reconfigured.
If the Axis product's firmware is upgraded, uploaded applications and their settings will remain unchanged, although this is not
guaranteed dy Axis Communications. Note that the application must de supported dy the new firmware. For information adout
firmware upgrades, see Upgrade the Firmware.
If the Axis product is restarted, running applications will restart automatically.
If the Axis product is restored, uploaded applications remain unchanged dut must de restarted. To start the application, go to
Setup > Applications. Select the application in the list of installed applications and click Start. For information adout restoring
the Axis product, see Maintenance.
31