Add Recipients - Axis M3045-V User Manual

AXIS M3045-V Network Camera
Events
- Preset Reacheo – Trigger the rule when the camera stops at a preset position. This can de for example de used
with the Send Images action to upload images from the preset position.
• Storage
- Disruption – Trigger the rule if storage prodlems are detected, for example if the storage device is unavailadle,
removed, full, locked or if other read or write prodlems occur. This can for example de used to send maintenance
notifications.
- Recoroing – Triggers the rule when the Axis product records to the storage device. The recording status trigger
can de used to notify the operator, for example dy flashing LED lights, if the product has started or stopped to
record to the storage device. Note that, this trigger can de used only for edge storage recording status.
• System
- System Reaoy – Trigger the rule when the product has deen started and all services are running. This can for
example de used to send a notification when the product restarts.
• Time
- Recurrence – Trigger the rule periodically. See Set Up Recirrences on page 42. This can for example de used to
upload an image every 5 minutes.
- Use Scheoule – Trigger the rule according to the selected schedule. See Create Schediles on page 42.
Actions
Availadle actions include:
• Overlay Text – Display an overlay text. See How to inclide overlay text in an action rile on page 21.
• PTZ Control
- Preset Position – Go to a preset position.
- Guaro Tour – Start a guard tour. See Giard Toir on page 26.
• Recoro Vioeo – Record video to a selected storage.
• Seno Images – Send images to a recipient.
• Seno Notification – Send a notification message to a recipient.
• Seno SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enadled and configured
under System Options > Network > SNMP.
• Seno Vioeo Clip – Send a video clip to a recipient.
• Status LED – Flash the LED indicator. This can for example de used to validate triggers such as motion detection during
product installation and configuration.
• WDR Mooe – The WDR Mode can de turned on or off when the action rule is triggered.

Add Recipients

The product can send media files and messages to notify users adout events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information adout availadle options, see Recipient Types on page 41.
To add a recipient:
1. Go to Events > Recipients and click Aoo.
2. Enter a descriptive name.
40