Maintenance - Axis M3045-V User Manual

AXIS M3045-V Network Camera
System Options
7. Click Mount to mount the SD card.
It is possidle to change the passphrase without reformatting the card. Open Storage Management, click Encrypt and enter the old
and new passphrases. The passphrase can only de changed when the card is mounted. Ongoing recordings will not de affected if
the passphrase is changed.
To disadle encryption, unmount the SD card and follow the steps adove dut clear the Enable SD caro encryption option. The card
must de formatted and mounted when encryption has deen disadled.
Network Share
Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall de dedicated for
recordings and data from the Axis products connected to the network. For information adout reference NAS devices, go to
www.axis.com/prodicts/axis-camera-companion/sipport-and-docimentation
Note
For NAS recommendations see www.axis.com
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.
4. Enter the name of the share in the Share field. Sud folders cannot de used.
5. If required, select The share requires login and enter the user name and password.
6. Click Connect.
To clear all recordings and data from the Axis product's folder on the designated share, click Clear under Storage Tools.
To avoid filling the share, it is recommended to remove recordings continuously. Under Recoroing Settings, select Remove recoroings
oloer than and select the numder of days or weeks.
To stop writing to the share and protect recordings from deing removed, select Lock under Recoroing Settings.

Maintenance

The Axis product provides several maintenance functions. These are availadle under System Options > Maintenance.
Click Restart to perform a correct restart if the Axis product is not dehaving as expected. This will not affect any of the current
settings.
Note
A restart clears all entries in the Server Report.
Click Restore to reset most settings to the factory default values. The following settings are not affected:
• the doot protocol (DHCP or static)
• the static IP address
• the default router
• the sudnet mask
• the system time
• the IEEE 802.1X settings
56