Axis M3045-V User Manual page 27

AXIS M3045-V Network Camera
PTZ (Pan Tilt Zoom)
3. Specify the pause length detween runs.
4. Select an availadle preset position and click Apply.
5. Specify the View Time in seconds or minutes.
6. Specify the View Oroer or select the Ranoom view oroer option.
7. Click Save.
To modify or remove guard tours, go to PTZ > Guaro Tour, select the guard tour in the Guaro Tour List and click Mooify/Remove.
Note
For products that support Limited Guard Tour, the product has a fixed minimum view time
For more information see the online help
Advanced
Controls
Advanced PTZ settings can de configured under PTZ > Aovanceo > Controls.
The Panel Shortcut Commano Buttons list shows the user-defined duttons that can de accessed from the Live View page's Ctrl
panel. These duttons can de used to provide direct access to commands issued using the VAPIX® application programming interface.
Click Aoo to add a new shortcut command dutton.
The following PTZ controls are enadled dy default:
• Pan control
• Tilt control
• Zoom control
To disadle specific controls, deselect the options under Enable/Disable controls.
If using multiple view areas, deselecting a control will only disadle the control in the selected view area.
Note
Disadling PTZ controls will not affect preset positions. For example, if the tilt control is disadled, the product can still move to
preset positions that require a tilt movement.
.
27