Media Converter Switch Led Indicators; Connectors And Buttons - Axis Q60-S Series Installation Manual

AXIS Q60-S Series
Green
Amber
Amber/Red
Red

Media Converter Switch LED Indicators

LED Color
Power Unlit
Green
Amber
Network (4x)
Green
Camera Green

Connectors and Buttons

For specifications and operating conditions, see page 18.
Network Connector
NO NO NO TICE TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer's instructions. For
information about regulatory requirements, see Electromagnetic Compatibility (EMC) on
page 2.
Multi-connector
Terminal connector for connecting the supplied media converter switch, which provides the
following signals:
• DC Power
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
The supplied multi-connector cable is required in order to maintain the product's NEMA/IP rating.
For more information, see Multi-Connector Cable on page 15.
www.a1securitycameras.com email: sales@a1securitycameras.com
Shows steady green for 10 seconds for normal operation after
startup completed.
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable or lost.
Flashes red for firmware upgrade failure.
Indication
DC power unconnected or current protection engaged (power
overload)
DC power connected.
10 Mbit connection. Flashes during activity.
100/1000 Mbit connection. Flashes during activity.
100 Mbit connection. Flashes during activity.
Available from A1 Security Cameras
14