Axis M3046-V User Manual
Hide thumbs
Also See for M3046-V:
- User manual (64 pages) ,
- Installation manual (28 pages) ,
- User manual (22 pages)
Related Manuals for Axis M3046-V
Summary of Contents for Axis M3046-V
- Page 1 AXIS M30 Network Camera Series AXIS M3044-V Network Camera AXIS M3045-V Network Camera AXIS M3046-V Network Camera User Manual...
-
Page 2: Table Of Contents
AXIS M30 Network Camera Series Table of Contents Solution overview ......... . . -
Page 3: Solution Overview
AXIS M30 Network Camera Series Solution overview Solution overview... -
Page 4: Get Started
Get started Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support. -
Page 5: Webpage Overview
AXIS M30 Network Camera Series Get started • Use a password with at least 8 characters, preferably created by a password generator. • Don’t expose the password. • Change the password at a recurring interval, at least once a year. - Page 6 AXIS M30 Network Camera Series Get started Settings tabs...
-
Page 7: Additional Settings
Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.com. - Page 8 Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel. 1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°.
-
Page 9: View And Record Video
Image with WDR. Note WDR may cause artifacts in the image. Find out more about WDR and how to use it at axis.com/web-articles/wdr. Maximize details in an image Important If you maximize details in an image, the bitrate will probably increase and you might get a reduced frame rate. -
Page 10: Set Up Rules And Alerts
AXIS M30 Network Camera Series Additional settings 1. Go to live view and select H.264. 2. Go to Settings > Stream. 3. Do one or more of the following: Turn on the Zipstream functionality and select the desired level. Turn on dynamic GOP and set a high GOP length value. - Page 11 This example explains how to display the text “Motion detected” when the device detects motion: Make sure that AXIS Video Motion Detection is running: 1. Go to Settings > Apps > AXIS Video Motion Detection. 2. Start the application if it is not already running.
- Page 12 1. Go to Settings > System > Events and add a rule. 2. Type a name for the rule. 3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD). 4. In the list of actions, under Recordings, select Record video while the rule is active.
-
Page 13: Learn More
The image shows how the field of view and aspect ratio can change between two different capture modes. Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet at axis.com. Overlays Note Image and text overlay will not be displayed on video stream over HDMI. - Page 14 H.264 or MPEG-4 Part 10/AVC Note H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. To install additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller. H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to the MPEG-4 standard.
-
Page 15: Applications
The counter is embedded in the camera which means you do not need a dedicated computer to run the application. AXIS People Counter is intended for retail environments, like stores or shopping malls, or other environments where you want to... -
Page 16: Troubleshooting
Using firmware from the active track is recommended if you want to access the newest features, or if you use Axis end-to-end system offerings. The LTS tracks are recommended if you use third-party integrations, which are not continuously validated against the latest active track. -
Page 17: Upgrade The Firmware
Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the... - Page 18 IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed by DHCP changed, use AXIS IP Utility or AXIS Device Manager to locate the device on the network. Identify the device using its model or serial number, or by the DNS name (if the name has been configured).
-
Page 19: Performance Considerations
Heavy network utilization due to poor infrastructure affects the bandwidth. • Viewing on poorly performing client computers lowers perceived performance and affects frame rate. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance. -
Page 20: Specifications
AXIS M30 Network Camera Series Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. Product overview AXIS M3044-V Dome cover Status LED microSD card slot Control button... -
Page 21: Led Indicators
This product supports microSD/microSDHC/microSDXC cards. For SD card recommendations, see axis.com. microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both. - Page 22 AXIS M30 Network Camera Series Specifications Network connector RJ45 Ethernet connector with Power over Ethernet (PoE).
- Page 23 User Manual Ver. M11.2 AXIS M30 Network Camera Series Date: February 2020 © Axis Communications AB, 2017 - 2020 Part No. T10106753...