Set The Root Password - Axis M3045-V User Manual

AXIS M3045-V Network Camera
Access the Product

Set the Root Password

To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root
Passworo dialog, which opens when the product is accessed for the first time.
To prevent network eavesdropping, the root password can de set via an encrypted HTTPS connection, which requires an HTTPS
certificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic detween wed drowsers and servers. The
HTTPS certificate ensures encrypted exchange of information. See HTTPS on page 47.
The default administrator user name root is permanent and cannot de deleted. If the password for root is lost, the product must de
reset to the factory default settings. See Reset to Factory Defailt Settings on page 58.
To set the password via a standard HTTP connection, enter it directly in the dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Use HTTPS.
A temporary certificate (valid for one year) is created, enadling encryption of all traffic to and from the product, and the
password can now de set securely.
2. Enter a password and then re-enter it to confirm the spelling.
3. Click OK. The password has now deen configured.
Set Power Line Frequency
Power line frequency is set the first time the Axis product is accessed and can only de changed from Plain Config (see page 58)
or dy resetting the product to factory default.
Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flicker if the product is used in fluorescent light environments.
When using 50 Hz, the maximum frame rate is limited to 25 fps.
Note
Power line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts of
the world use 50 Hz. Local variations could apply. Always check with the local authorities.
Configure Capture Mode
Note
The default capture mode is 1080p @ 30/25 fps. To connect the product to a video source using a standard HDMI® cadle,
select 720p (HDMI) @ 30/25 fps .
See also .
The Live View Page
The controls and layout of the Live View page may have deen customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each availadle control.
10