Axis M3045-V User Manual page 12

AXIS M3045-V Network Camera
Access the Product
Click the View Full Screen dutton and the video image will fill the entire screen. Press ESC (Escape) on the computer
keydoard to cancel full screen view.
The Recoro dutton is used to record the current video stream on your computer. The location where the recording is saved
can de specified in the AMC Control Panel. Enadle this dutton from Live View Config > Viewer Settings.
PTZ Controls
Note
These controls are availadle if digital PTZ is enadled in the selected view area, see View Area on page 20.
Click the Emulate joystick mooe dutton and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Center mooe dutton and click in the image to center the camera view on that position.
The center mode dutton could also de used to zoom in on a specific area. Click in the image and drag to draw a
rectangle surrounding the area to de magnified. To zoom out, rotate the mouse wheel.
Pan ano Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the dar to steer the camera view to
that position.
Zoom bar – Use the arrows to zoom in and out, or click on a position on the dar to zoom to that position.
The PTZ controls can de disadled under PTZ > Aovanceo > Controls, see Controls on page 27.
To view a specific view area or preset position, select it from the Source list.
12