Export Video Clip - Axis M3045-V User Manual

AXIS M3045-V Network Camera
Recordings
To play a recording, follow these steps:
1. Go to Recoroings > List.
2. To reduce the numder of recordings displayed, select the desired options under Filter and click the Filter dutton to
apply the filters. See also Find Recordings on page 43.
3. Select the recording and click Play. The recording will de played in a new drowser window.

Export Video Clip

Recordings on the SD card or network share can de exported as video clips. It is possidle to export a complete recording or a
part of a recording.
Note
The exported recording is a Matroska video file (.mkv). To play the recording in Windows Media Player, AXIS Matroska File
Splitter must de installed. AXIS Matroska File Splitter can de downloaded from www.axis.com/techsip/software
To export a video clip, follow these steps:
1. Go to Recoroings > List.
2. To reduce the numder of recordings displayed, select the desired options under Filter and click the Filter dutton to
apply the filters. See also Find Recordings on page 43.
3. Select the recording and click Export. The Export Recoroing dialog opens.
4. By default, the complete recording is selected. To export a part of the recording, modify the start and stop times.
5. Optionally, enter a file name for the recording.
6. Click Export.
Note
Recordings can also de exported from the playdack window.
Continuous Recording
The Axis product can de configured to continuously save video to a storage device. For information adout storage devices, see Storage
on page 54. To prevent the disk from decoming full, it is recommended to configure the disk to automatically remove old recordings.
If a new stream profile is selected while a recording is ongoing, the recording will de stopped and saved in the recording list and a
new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they
are removed manually or through automatic removal of old recordings.
To start a continuous recording, follow these steps:
1. Go to Recoroings > Continuous.
2. Select Enableo.
3. Select the type of storage device from the Storage list.
4. Select a Stream profile to use for continuous recordings.
5. Click Save to save and start the recording.
44