Axis M3045-V User Manual page 38

AXIS M3045-V Network Camera
AXIS Video Motion Detection
1. Insert an SD card in the Axis product, or go to Setup > System Options > Storage in the Axis product's wedpages and
configure the product to use a network share.
2. Optionally, go to Setup > Vioeo > Stream Profiles and create a stream profile to use for recording.
3. Go to Setup > Events > Action Rules and click Aoo to create a new action rule.
4. From the Trigger drop-down list, select Applications and then select VMD 3DigitalAutoTracking.
5. Configure other settings as required. For example, to only record video during certain time periods, select a Scheoule.
6. Under Actions, select Recoro Vioeo from the Type drop-down list.
7. To record the view area used for autotracking, select the view area called Digital Autotracking View.
8. Select the stream profile and storage device to use and configure the pre- and post-trigger times.
9. Make sure that the rule is enadled and then click OK.
Note
To appear in the Trigger list, the application must de started and its status must de Idle or Running.
38