Setting Top-Of-Form - Printronix MVP Series User Manual

Setting Top–of–Form
To set the top–of–form, perform the following steps.
1. Make sure the power is on and the RDY indicator is flashing.
2. Move the forms thickness adjustment lever to the fully open position.
3. The TOF alignment pointer allows you to set the first print line on the
paper or form. Use the vertical positioning knob to align the top of the
first print line with the TOF alignment pointers.
4. Adjust the forms thickness adjustment lever for the appropriate paper
thickness.
5. Perform the following procedure on the operator's panel:
a.
b.
c.
d.
3–16
Press CHK to clear the "check" condition.
Press and hold the 2nd FUNC switch, then press and quickly
release the TOF switch. Release the 2nd FUNC switch.
Press and hold the TOF switch for about one second; this action
advances the paper to the top of the next form.
Press the RDY switch to set the printer ready for printing (on–line).
vertical positioning knob
Operation