Table of Contents
Advertisement
Character Name
Escape, "Y"
Escape, "Z"
Escape, Zero
Escape, One
Escape, Two
Escape, Three
Decimal Number
0–255
Escape, Six
Escape, Seven
Escape, Eight
Escape, Nine
Escape, –0
Escape, –1
Escape, –2
Escape, –3
Programming
Control Code
Dec Value
(ASCII)
CHR$(n)
ESC Y
(27) (89)
(n1) (n2)
ESC Z
(27) (90)
(n1) (n2)
ESC 0
(27) (48)
ESC 1
(27) (49)
ESC 2
(27) (50)
ESC 3(n)
(27) (51) (n)
(0 < n < 255)
ESC 6
(27) (54)
ESC 7
(27) (55)
ESC 8
ESC 9
ESC –0
ESC –1
ESC –2
ESC –3
Printer Response
a) Option code 34.0 causes ESC Y to act
as even dot plot. (Same as 04 code when
40.0 is set.)
b) Using 34.1, ESC Y is ignored; data
following is interpreted, literally.
a) Option code 34.0 causes ESC Z to act
as odd dot plot. (Same as 05 code when
40.0 is set.)
b) Using 34.1, ESC Z is ignored;
data following is interpreted literally.
Sets 8 lines per inch for the following
lines. Lights 8 lpi LED.
Sets 10 lines per inch for the following
lines. Lights 8lpi LED.
Sets 6 lines per inch for the following
lines. Turns 8 lpi LED off.
Sets line spacing equal to n/216 inch.
Selects decimal range 128–160 to be
printable characters until cancelled by
ESC 7.
Selects decimal range 128–160 as control
characters.
Turns the paper sensor OFF.
Turns the paper sensor ON.
Turns the underline mode OFF.
Turns the underline mode ON.
Turns the double– underline mode ON
Turns the double–underline mode OFF
7–35
Advertisement
Table of Contents
