Interface Configuration Options - Printronix MVP Series User Manual

Interface Configuration Options 60–99
The final step in the printer/host computer interfacing procedure requires
obtaining a configuration printout (self–test 00.1) to ensure that the correct
interface control configuration options (addresses 60–99) are set. Addresses
60–66 apply to the parallel (Centronics and Dataproducts) interfaces. Refer
to Chapter 4 for reconfiguration procedures.
Table 8–5. Quick Reference Table for Interface Configuration Options 60 –99
Configuration
Number
60
61
62
63
64
65
66
67–69
70 MVP/L150
71 MVP/L150
72 MVP/L150
73 MVP/L150
74 MVP/L150
75 MVP/L150
76 MVP/L150
77 MVP/L150
78 MVP/L150
79 MVP/L150
80 MVP/L150
81 MVP/L150
82 MVP/L150
83 MVP/L150
84 MVP/L150
85–89
90–99
8–8
Printer Configuration Option
Type
All Data Line 8 with Parallel Interface
All Paper Instruction with Parallel Interface
All Data Strobe Line Polarity with Parallel Interface
All Data Lines and Response Line Logic Polarity with Parallel Interface
All Reserved for Future Use
All Busy
All Parallel Interface Selection
All Reserved for Future Use
Serial Interface/Protocol Selection
Serial Data Transfer Baud Rate
Data Word Interface Configuration
Transmitted Data Polarity
Request to Send (RTS)
Clear to Send (CTS) and Carrier Detect (CD)
Data Set Ready (DSR–RS–232 pin 6)
Reverse Channel (RC)
Data Terminal Ready (DTR)
XON Buffer Level Threshold
XOFF Buffer Level Threshold
Current Loop Out
Protocol Character Assignment – XON or ACK
Protocol Character Assignment – XOFF or NAK
Protocol Character Assignment – ETX
All Reserved for Future Serial Interface Options
All Reserved for Future Options
Page #
8–9
8–10
8–11
8–12
8–13
8–14
8–15
8–16
8–17
8–18
8–19
8–20
8–21
8–22
8–23
8–24
8–24
8–24
8–25
8–25
8–25
Interfaces