Printronix MVP Series User Manual page 70

Option 29 — Delete Code 7F
Discussion
When a DEL (Delete) code is received, either a character from a font or a
space may be printed depending on the configuration option selected.
MVP/L150
Option
Number
.0
.1
150B/L150B
Option
Number
.0
.1
.2
NOTE: This option is only available on printers equipped with V50. 59
4–18
Display Configuration
Description
29.0 Enable space response to DEL code (default).
29.1 Disable. Prints whatever character is in the font PROM at the DEL
code address.
Display Configuration
Description
29.0 DEL codes (7FH and FFH) are printable characters (default).
29.1 DEL codes are destructive back spaces.
29.2 DEL codes are ignored in data stream.
DCU and MCU 20.25 (or later) firmware and primary font PROM
116043–001 or equivalent.
Configuration