Printronix MVP Series User Manual page 83

Option 46 — EVFU Control with no PI
150B/L150B
Option
Number
.0
.1
.2
.3
NOTE: 46.1 is effected by Control Code 42 and Control Codes 10H – 1FH
Configuration
Display Configuration
Description
Disable EVFU control with no PI and control codes: SO for double
46.0
wide, SI for mode 5 print, and BS (OEH, OFH, and 08H) for
non–destructive backspace. (default) Configuration Operation 42.x
is ignored but PI EVFU remains functional (61.1 set).
Enable EVFU control with no PI and control codes: SO for alternate
46.1
font, SI for deselect alternate font, and BS (OEH, OFH, and 08H)
for elongated print.
Same as 46.1 setting with the exception of the interpretation of the
46.2
ESC code [1BH]. ESC cannot be used to initiate an escape
sequence; instead use SOH code [01H] as an alternative.All control
codes 10H – 1FH, including DC2, DC4 and CAN, can be used as
EVFU channel commands.
Same as 46.0 except BS (08H) is used to turn one–line vertical
46.3
elongated ON.
can be used as EVFU control commands (except for ESC code
[1BH] that is part of an escape sequence and codes DC 2 [12H],
DC4 [14H], and CAN [18H].
4–31