Printronix MVP Series User Manual page 79

Option 42 — Electronic Vertical Format Unit (EVFU) Control
Discussion
The EVFU is normally fully enabled with Option 61 set to 61.0. When
Option 61 is set to 61.1, Paper Instruction (PI) may be used to disable Paper
Slew.
MVP/L150
Option
Number
.0
.1
.2
NOTE: 42.0 requires selection of Configuration Option 61.0; 42.1 and 42.2
150B/L150B
Option
Number
.0
.1
Configuration
Display Configuration
Description
42.0 Enable EVFU control (default).
42.1 Disable EVFU using ASCII Control Code. PI EVFU control
remains enabled.
42.2 Disable EVFU and interpret 10H through 1FH as printables
(requires special font PROM). PI control of EVFU remains enabled.
require selection of Configuration Option 61.1.
Display Configuration
Description
42.0 Enable EVFU control (default).
42.1 Disable Non–PI EVFU control; PI EVFU remains functional (see
Configuration Option 46).
4–27