Table of Contents
Advertisement
Character Name
FS
GS
RS
US
Delete
End of Text
Enquire
Escape Codes
(see page 7–30)
Form Feed
Horizontal Tab
Line Feed
NULL
7–30
Control Code
Dec Value
(ASCII)
CHR$(n)
FS
(28)
GS
(29)
RS
(30)
US
(31)
DEL
(127)
EOT
(4)
ENQ
(5)
FF
(12)
HT
(9)
LF
(10)
NUL
(0)
(255)
Printer Response
EVFU channel 13.
EVFU channel 14.
EVFU Start load.
EVFU End load.
• Produces a spare or character in position
(127) in configuration 29.0.
• Deletes previous character sent in
configuration 29.1
• Ignored in configuration 29.2.
Enters even dot plot mode.
(See ESC L also.) Refer to page 7–10.
Enters odd dot plot mode.
(See ESC K also) Refer to page 7–11.
Advances paper to top of next page (or
"form"). Top–of–Form (TOF) and forms
length are set when paper is loaded (refer
to Chapter 2). Forms length may be
changed with control code Esc C from the
host computer or the front panel switches.
Tabs printer to next horizontal tab stop.
Refer to detailed explanation of horizontal
tabbing on page 7–36.
Advances paper feed mechanism one line.
Line spacing is usually 1/6 inch (6 lines
per inch) unless set to 8 or 10 lpi by
control codes ESC 0 or ESC 1; or unless
ESC A (n) or ESC 3 (n) have been used to
modify the amount of paper moved in
response to a Line Feed command.
Terminates the tab setting sequence.
See page 7–36 for details of horizontal
tabs. Also part of control sequences.
Programming
Advertisement
Table of Contents
