Printronix MVP Series User Manual page 88

Option 52 — Forms Length at Printer Power Up
Discussion
Forms length can be set to one of seven selectable lengths including the
default 11 inches. With Option 52 set to 52.7, any forms length between 3
inches and 24 inches (in 1/2–inch increments) can be selected with the Forms
Length (F/L) switch.
MVP/L150
Option
Number
.0
.1
.2
.3
.4
.5
.6
.7
NOTE: Forms length selection is disabled when the EVFU is active and
150B/L150B
Option
Number
.0
.1
.2
.3
.4
.5
.6
.7
NOTE: Forms length selection is disabled when the EVFU is active and
4–36
Display Configuration
Description
Enable 11 inch form (default).
52.0
Enable 3.5–inch form.
52.1
Enable 5.5–inch form.
52.2
Enable 8–inch form.
52.3
Enable 8.5–inch form.
52.4
Enable 12–inches form.
52.5
Enable 14–inch form.
52.6
Enable F/L switch setting; F/L switch retained when power is
52.7
cycled to the printer.
requires that printer power be cycled to set reconfiguration.
Display Configuration
Description
Enable 11 inch form (default).
52.0
Enable 3.5–inch form.
52.1
Enable 5.5–inch form.
52.2
Enable 8–inch form.
52.3
Enable 8.5–inch form.
52.4
Enable 12–inches form.
52.5
Enable 14–inch form.
52.6
Enable F/L switch setting.
52.7
requires that printer power be cycled to set reconfiguration.
Configuration