Table of Contents
Advertisement
ADDR/Data
Switches
00.1
Configuration printout including part numbers of each installed PROM and font
00.2
Primary and alternate font – printout of each installed character set including
PROM part numbers
01.1
(MVP/L150) Continuous sequence of test patterns 05.1, 05.2 and 06.1
(150B/L150B) 02.1, 02.2, 02.3, 02.4, 03.1, 03.2, 03.3, 03.4, 05.1, 05.2, 06.1
02.1
All E repeating
02.2
All H repeating
02.3
All # repeating
02.4
All _ (Underline) repeating
03.1
Shift recycle repeating
03.2
Row increment repeating (64 characters set) (150B only)
03.3
All black plot, half speed, repeating
03.4
64 characters set, underlined repeating (150B only)
05.1
Shift recycle, full character set
05.2
Double High 16 lines
06.1
Top–of–Form, slews, and prints one line six times
15.0*
Hex dump mode disable (default)
15.2*
Flush last hex dump text line
16.0*
Reconfiguration disable (default) – Lock/unlock feature (150B only) (page 4–4)
16.3
Reconfiguration enable – Lock/unlock feature (150B only) (page 4–4)
16.4
Accidental Reconfiguration enable (page 4–4)
22.0
Self–Test 80 column print (default) (refer to page 4–11)
22.1
Self–Test 132 column print (150B only) (refer to page 4–11)
Routine Service and Diagnostics
Table 9–2. Self–Tests
Configuration
Automatic Sequence
Repeating Tests
Print Tests
Paper Motion Test
NOTE: 12.1 through 14.0 are used by service technicians.
Hex Dump Mode
*NOTE: 16.3 must be set to enable access to these options.
Page #
9–12
9–12
9–13
9–14
9–15
9–16
9–17
9–11
Advertisement
Table of Contents
