Configure The Ftp Default Settings - Brother ADS-2400N User Manual

Scan Using the Control Panel

Configure the FTP Default Settings

1
Click the Scan tab.
2
Click the Scan to FTP/SFTP/Network/SharePoint menu in the left navigation bar.
3
Select the FTP option, and then click Submit.
4
Click the Scan to FTP/SFTP/Network/SharePoint Profile menu in the left navigation bar.
5
Select the profile you want to set up or change.
6
In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). This
name appears in the Destination field when you click Scan to Network Device in the left navigation bar
(ADS-2400N / ADS-3000N) or on the machine's Touchscreen (ADS-2800W / ADS-3600W).
7
In the Host Address field, type the Host Address (for example: ftp.example.com; up to 64 characters)
or the IP address (for example: 192.23.56.189), and type the path (up to 60 characters) to the folder on
the FTP server where you want to send your scanned data. Do not type a slash mark at the beginning
of the path.
8
In the Username field, type the user name (up to 32 characters), that has permission to write data to the
FTP server.
9
In the Password field, type the password (up to 32 characters) associated with the user name you
entered in the Username field. Type the password again in the Retype Password field.
0
In the Store Directory field, enter the destination folder where your document will be stored on the
FTP server (up to 60 characters).
7
7
145