Chapter 4 Adjusting And Updating Settings As Required After Parts Replacement; If You Replace The Main Pcb Assy - Brother PDS-5000 Service Manual

CHAPTER 4 ADJUSTING AND UPDATING

1. IF YOU REPLACE THE MAIN PCB ASSY

 What to do after replacement
• Installing Firmware (Sub Firmware, Panel Firmware, and Main Firmware)
• Setting Serial Number
• Setting Multi-feed Sensor Threshold
• OD Adjustment (Optical Density Learning)
• Checking Operation after Repair
 What you need to prepare
(1) One USB cable
(2) Create a temporary folder on the C drive of the computer (Windows
(3) Service setting tools (StdL2Setup.exe, SetupAddon.exe, Serial_number.exe)
Pre-install them into computer according to
(4) Product driver
Pre-install it into computer according to QSG.
(5) Main firmware
Main firmware
V×××: Alphabetic character representing the revision version of the firmware
Copy this file into the temporary folder created on the C drive.
SETTINGS AS REQUIRED
AFTER PARTS
REPLACEMENT
4-1
APPENDIX 2.
PDS-5000_FW_V×××.exe or
PDS-6000_FW_V×××.exe
®
XP or later).
Confidential