Brother ADS-2400N User Manual page 196

Scan Using the Control Panel
Scan Using Web Services (Windows Vista
®
Windows 8, Windows
The menu that allows you to use Web Services for scanning appears in the Destination field when you click
Scan to Network Device in the left navigation bar (ADS-2400N / ADS-3000N) or on the machine's
Touchscreen (ADS-2800W / ADS-3600W), if you have installed the driver for scanning via Web Services.
For information about installing Web Services, see Install Drivers Used for Scanning via Web Services
®
(Windows Vista , Windows
• If the Touchscreen or LED indications show Out of Memory, decrease the Paper size setting or the
Resolution setting. For more information, see Configuring Settings for Scanning on page 181.
• Certain characters in the messages displayed on the Touchscreen may be replaced with spaces when the
language settings of your OS and your Brother machine are different.
For ADS-2400N and ADS-3000N only
If you are using ADS-2400N or ADS-3000N, you must assign WS Scan to a Network Device Key 1 - 3.
For more information, see Assign the Scan Feature to the Network Device Key 1-3 on page 31.
1
Load your document.
2
Press ,
The machine starts scanning.
For ADS-2800W and ADS-3600W only
1
Load your document.
2
Swipe left or right.
3
Press WS Scan.
4
Press the type of scan you want.
5
Press a or b to display the destination computer you want to send to.
Press the destination computer.
6
Press Start.
The machine starts scanning process.
®
8.1 and Windows
® ®
7, Windows 8, Windows
or to which you have assigned the Web Service Scan feature.
®
, Windows
®
10)
® ®
8.1, Windows 10) in the Network User's Guide.
®
7,
7
7
180