Appendix
Service Call Indications
If there is an error that you cannot clear yourself, the machine will indicate the need for a service call by
lighting up all the LEDs as shown below.
If you see the service call indication shown above, turn the machine off and then on, and then try to scan
again.
If the error is not cleared after turning the machine off and on, press Stop. The LEDs will light up as shown in
the table below to identify the error.
Error Code
A8: Matching failure of
color parameter
A9: Detected a special
scanning error
E9: NFC module
initialization failure
(ADS-3600W only)
FE: ROM1 data
acquisition error
Make a note of the error code and report it to your Brother dealer or Brother customer service (see For
Customer Service on page ii).
Network
Network
Network
Device 1
Device 2
Device 3
Scan to
Scan to
Error
PC
USB
Indicator
B
Power
Indicator
B
266