Brother ADS-2400N User Manual page 118

Scan Using Your Computer
Setting Description
Document Document size is set to Auto by default. You can scan
Size documents of any size without making adjustments to
Document Size.
exact size of your document from the Document Size
drop-down list.
NOTE
• If you select a 1 to 2 document size, the scanned
image will be divided into two documents that are
half the size of the setting. If you select 1 to 2(A4),
the scanned image will be divided into two A5-size
documents.
• To do 1 to 2 scanning, clear the Auto Image Rotation
check box in the Advanced Settings dialog box.
• If you select a 2 in 1 document size, two scanned
images will be combined into one document.
Brightness Adjust the setting (-50 to 50) to get the best image. The
default value of 0 represents an average and is suitable
for most images. Set the Brightness level by dragging
the slider to the right or left to lighten or darken the
image. You can also enter a value in the box to set the
level. If the scanned image is too light, set a lower
Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
1
Depending upon the condition of the original document, this function may not work properly.
1
For faster scan speeds, select the
Applicable Feature
Image OCR E-mail File
Yes Yes Yes
Yes Yes Yes
Print
Yes Yes
6
Yes Yes
102