Plastic Cards - Brother ADS-2400N User Manual

Scan Preparation

Plastic Cards

1
Adjust the Paper Guides 1 to fit the width of your document.
2
Place your card, face down and top edge first in the ADF between the Guides until you feel it touch the
inside of the machine.
NOTE
• You can load up to 5 plastic cards (total thickenss less than 0.2 in. (5.0 mm)) at a time.
• Certain types of plastic cards may be scratched when scanned.
• Rigid cards may not be fed properly.
• If the surface of the card is dirty with grease marks (for example, fingerprints) and such wipe the dirt off
before scanning.
• Scanning plastic cards can be falsely detected as a multifeed.
In that case, to scan documents successfully, disable multifeed detection.
1
3
3
64