Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
> Configure Your Machine for a Wireless Network Using the One-Push Method of Wi-Fi Protected
™
Setup
(WPS)
Configure Your Machine for a Wireless Network Using the One-Push
Method of Wi-Fi Protected Setup
Related Models: DSmobile DS-940DW
If your wireless access point/router supports Wi-Fi Protected Setup
machine to configure your wireless network settings.
Routers or access points that support WPS are marked with this symbol:
1. Slide the Mode Select Switch to
The Wi-Fi LED blinks.
2. Press and hold the WPS button on your machine for two seconds.
The Wi-Fi LED starts to blink more rapidly.
3. Press the WPS button on your wireless access point/router.
If your machine is connected successfully, the Wi-Fi LED stop blinking and becomes lit.
You have completed the wireless network setup. To install drivers and software necessary for operating your
machine, go to your model's Downloads page at support.brother.com.
To configure additional Network Settings, use the Web Based Management. See Related Information: Access
Web Based Management.
Related Information
•
Additional Methods of Configuring Your Brother Machine for a Wireless Network
Related Topics:
•
Access Web Based Management
™
(WPS)
.
™
(WPS), you can use WPS from your
70