Removal Of The Left Side Cover - Barco ZEUS Installation And Safety Manual

16.4 Removal of the left side cover

W
ARNING
procedure.
Necessary tools
7mm flat screwdriver.
How to remove the left side cover?
1. Release the small dust filter assembly from the front side of the projector. Use 7mm flat screw driver to loosen the captive screw
(reference 1 image 16-4) of the small dust filter assembly.
Note: The left side cover is partial captured by the sheet metal of the small filter assembly. For that, this filter has to be (partially)
removed first.
1
Image 16-4
2. Loosen the five captive screws (reference 2 image 16-5) of the left side cover using a 7mm flat screwdriver.
3. Remove the left side cover from the projector.
1
Image 16-5
R5905961 ZEUS 09/03/2015
:
Switch off the projector prior to starting with this procedure, unless otherwise specified in the
16. Removal and installation of the projector covers
2
145