Selector Switches - GE C30 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
 DIGITAL COUNTERS
 Counter 1
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The
6
PATH: ACTUAL VALUES
 FLEX STATES

There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
PATH: ACTUAL VALUES
 ETHERNET

These values indicate the status of the primary and secondary Ethernet links.
6-6
 
STATUS

SELECTOR SWITCHES

SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
 
STATUS DIGITAL COUNTERS
Counter 1
Counter 1
MESSAGE
Counter 1
MESSAGE
YYYY/MM/DD HH:MM:SS
Counter 1
MESSAGE
COUNTER 1 MICROS
 
STATUS FLEX STATES
PARAM
Off
PARAM
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
 
STATUS ETHERNET
ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
MESSAGE
STATUS: OK
C30 Controller System
Range: Current Position / 7
Range: Current Position / 7

DIGITAL COUNTERS Counter 1(8)
ACCUM:
0
FROZEN:
0
FROZEN:
MICROS:
0
value refers to the microsecond portion of the time stamp.
Range: Off, On
1: Off
Range: Off, On
2: Off
↓
Range: Off, On
Range: Fail, OK
Range: Fail, OK
6 ACTUAL VALUES
6.2.9 SELECTOR SWITCHES
6.2.10 DIGITAL COUNTERS
6.2.11 FLEX STATES
6.2.12 ETHERNET
GE Multilin