Faceplate - GE C30 Instruction Manual

4 HUMAN INTERFACES 4.3 FACEPLATE INTERFACE
4.3FACEPLATE INTERFACE

4.3.1 FACEPLATE

a) ENHANCED FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules.
4
Figure 4–15: UR-SERIES ENHANCED FACEPLATE
b) STANDARD FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules. There is also a removable dust cover that fits over
the faceplate which must be removed in order to access the keypad panel. The following figure shows the horizontal
arrangement of the faceplate panels.
LED panel 1 LED panel 2 LED panel 3
Display
Front panel
RS232 port
Small user-programmable
User-programmable
Keypad
(control) pushbuttons 1 to 7
pushbuttons 1 to 12
827801A7.CDR
Figure 4–16: UR-SERIES STANDARD HORIZONTAL FACEPLATE PANELS
GE Multilin C30 Controller System 4-13