Digital Counters; Selector Switches; Flex States; Ethernet - GE T60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 DIGITAL COUNTERS
 Counter 1
MESSAGE
MESSAGE
MESSAGE
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The

PATH: ACTUAL VALUES STATUS
 SELECTOR SWITCHES

MESSAGE
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

PATH: ACTUAL VALUES STATUS
 FLEX STATES

MESSAGE
MESSAGE
TM
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.

PATH: ACTUAL VALUES STATUS
 ETHERNET

MESSAGE
MESSAGE
GE Multilin
 

DIGITAL COUNTERS

DIGITAL COUNTERS Counter 1(8)
Counter 1 ACCUM:
0
Counter 1 FROZEN:
0
Counter 1 FROZEN:
YYYY/MM/DD HH:MM:SS
Counter 1 MICROS:
0
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS


SELECTOR SWITCHES

SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
POSITION: 0/7


FLEX STATES

PARAM 1: Off
Off
PARAM 2: Off
Off
↓
PARAM 256: Off
Off


ETHERNET

ETHERNET PRI LINK
STATUS: Fail
ETHERNET SEC LINK
STATUS: Fail
ETHERNET TRD LINK
STATUS: Fail
T60 Transformer Protection System
6.2.8 DIGITAL COUNTERS
6.2.9 SELECTOR SWITCHES
Range: Current Position / 7
Range: Current Position / 7
6.2.10 FLEX STATES
Range: Off, On
Range: Off, On
Range: Off, On
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
6.2 STATUS
6
6.2.11 ETHERNET
6-7