Engine Assembly To Frame; Engine On Cradle Frame; Cradle Frame With Engine, On Main Frame - Royal Enfield Himalayan Service Manual

ENGINE ASSEMBLY TO FRAME

S.
Aggregate to Assemble/
No.
Instructions
Engine on Cradle
4.20
Frame
 Locate Engine on cradle
frame & ensure the 3
mounting holes of the
cradle frame and the
engine are aligned.
 Insert Hex bolt M10X165
from RH side and
assemble U
M10X1.25. DO
TIGHTEN FULLY.
 Insert2 flanged Hex bolts
M10X183 from the front
& rear bottom RH side
and assemble U nut
M10X1.25. DO
TIGHTEN FULLY.
 Tighten all
mountings diagonally
to torque.
Cradle frame with
4.21
engine, on Main
Frame
 Locate cradle frame /
engine from underneath
main frame and lift up
with suitable support
under engine such that
the stud mounting holes
align as follows:
- Crankcase rear top hole
with frame mounting.
- 2 mounting holes of
cradle frame with 2 holes
in frame down tube.
- 2 mounting holes at the
rear bottom of cradle frame
with 2 holes in main frame.
 Insert flanged Hex Bolt
M10X 183 at rear top of
engine and assemble U
nut.
DO NOT TIGHTEN
FULLY.
30
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
nut
NOT
Hex flange bolts:
M10X165 & M10X183
Hex U Nuts: M10X1.25
Ring Spanner: 14mm.
NOT
Socket Spanner: 14mm.
the
Torque: 50 Nm (5.0 Kg.M)
Hex flange bolts:
M10X183 & M10X165
Hex U Nuts: M10X1.25
Ring Spanner: 14mm.
Socket Spanner: 14mm.
Torque: 50 Nm (5.0 Kg.M)