Electricals; Battery - Royal Enfield Himalayan Service Manual

SECTION 16 - ELECTRICALS
S.
Aggregate to Dismantle/
No.
Instructions

Battery

16.1
 Remove side panel on
the right side
unscrewing 2 hex socket
button head screws.
 Unlock (turn the key
clockwise) and remove
the pillion seat.
 Remove front seat.
 Disconnect
terminals:
terminal first & negative
terminal next
 Remove flasher unit
along with its rubber
holder from battery
strap.
 Disconnect starter relay
couplers
- White colour from wiring
harness
- Red colour from Battery.
 Remove starter relay
along with its rubber
holder from battery
strap.
 Remove Hex screw from
battery strap front.
 Release battery strap
from the slot in the rear
and remove strap.
 Remove battery from
the housing.
184
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
by
battery
positive
CAUTION:
Ensure starterrelay to starter
motor wire is removed from
the slot in battery strap
before removing starter relay.
Hex head screw: M6
Socket Spanner: 10mm