Royal Enfield Himalayan Service Manual page 149

S.
Aggregate to Assemble/
No.
Instructions
Front Disc Brake
13.3
Wheel caliper on
13.3.3
fork end LH
 Locate caliper on fork
end LH and ensure the
brake disc is positioned
between the brake
pads.
 Tighten caliper assembly
to fork end with 2 hex
bolts.
Front Disc Brake
13.3
Master cylinder on
13.3.4
handle bar
 Locate master cylinder
assembly on the handle
bar.
 Locate clamp on handle
bar and tighten the
master cylinder assy. To
handle bar with 2 hex
bolts.
 Smear the piston, seals
and cylinder bore with
fresh brake fluid and
assemble piston sub-
assembly into
master cylinder by gently
pushing it into the bore.
148
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
Hex bolt: M10
Socket spanner: 12mm
Torque: 30Nm (3.0Kgm)
Hex Bolts : M6
Socket spanner : 8mm
Torque : 9Nm (0.9 KgM)
the
NOTE:
Ensure the circlip is seated
correctly inside the groove.