Royal Enfield Himalayan Service Manual page 161

S.
Aggregate to Assemble/
No.
Instructions
13.5 Disc brake bleeding
 Ensure the bleeder
screw is tightened fully
and fix the dust cap.
 Check and top up brake
fluid in the master
cylinder reservoir up to
For front brake master
cylinder
 Assemble diaphragm,
plate and top cover and
tighten with 2 slotted
screws on the front
brake master cylinder.
For front brake master
cylinder
 Tighten the cover firmly
on the reservoir in the
rear brake
cylinder.
160
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
Slotted screw
Philips head Screw driver
Torque: 1.5Nm (0.015KgM)
NOTE:
Check and ensure there is no
sponginess of the brake
lever / pedal when brakes
are applied.
Carry out a road test to
check the braking efficiency.
Check for any leaks at the
banjo or the bleeding screw
areas and ensure all
tightness of all fasteners.
master