Handle Bar Switch Lh; Handle Bar Switch Rh; Clutch Switch - Royal Enfield Himalayan Service Manual

S.
Aggregate to Dismantle/
No.
Instructions
Handle Bar Switch
16.12
LH
 Open cable straps to
release the
harness.
 Disconnect wire coupler
from main cable harness
near Steering stem on
LH side.
 Remove 2 Philips head
screw from bottom of
switch LH.
Handle Bar Switch
16.13
RH
 Open cable straps to
release the
harness.
 Disconnect wire coupler
from main cable harness
near Steering stem on
RH side.
 Remove 2 Philips head
screw from bottom of
switch RH.

Clutch Switch

16.14
 Release coupler lock
from the switch on
Handle bar LH, bottom.
 Loosen 2 screws holding
clutch switch to switch
module LH and remove
clutch switch
190
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
NOTE:
wiring
The straps fixed in the
handle bar are reusable
hence do not remove them
from the handle bar if not
required to be removed.
Screw driver
NOTE:
wiring
The straps fixed in the
handle bar are reusable
hence do not remove them
from the handle bar if not
required to be removed.
Screw driver