Mud Flap Rear; Rear Mudguard - Royal Enfield Himalayan Service Manual

S.
Aggregate to Dismantle/
No.
Instructions

12.3 Mud flap rear

 Remove 2 hex socket
head cap screws with
washers, holding mud
flap to rear mudguard
bottom.
 Remove 2 hex bolts
holding mud flap to rear
mudguard top & remove
mud flap. (Ensure 2
rubber grommets & 2
faced spacers
removed).
 Disconnect Trafficator
couplers LH & RH.

Rear Mudguard

12.4
 Remove 2 each hex
socket head cap screws
from saddle
mounting plates LH &
RH.
 Support rear mudguard
and remove 2 hex socket
head cap screws on LH &
RH side and remove rear
mudguard.
Fastener, Size, Tool Usage, Precautions, Photos
Hex Soc. Hd cap screws:M5
Allen key: 4mm
Hex bolt: M6
Socket spanner:10mm
NOTE:
are
Support mud flap and
disconnect number plate
illuminator coupler
NOTE:
Couplers are color coded :
bag
LH side: Green
RH side: Red
NOTE:
Support saddle mounting
plate LH to prevent damage
to seat latch cable.
Hex Soc. Hd cap screws:
M5
Allen key:4mm
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
113