Brake Hose - Royal Enfield Himalayan Service Manual

S.
Aggregate to Assemble/
No.
Instructions
Rear Disc Brake
13.4
Master cylinder
13.4.4
reservoir
 Align reservoir mounting
hole to frame and
tighten with hex socket
head screw.
 Connect rubber hose to
reservoir and master
cylinder and lock metal
clip in place firmly at
both ends.

Brake hose

13.4.5
 Position brake hose
against the mounting
hole on master cylinder
such that it is pointing
inwards correctly.
 Locate 2 new copper
washers on either sides
of the brake hose banjo.
 Assemble Banjo bolt
with brake switch on the
brake hose banjo, and
tighten banjo to master
cylinder.
 Connect brake light
switch coupler to main
harness.
156
ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
Hex soc Hd screw : M4
Allen key : 5mm
Brake light switch
Double end spanner:
14mm
NOTE:
Ensure proper routing of
brake hose before
tightening.