Using The Treadmill Safety Clip - Precor TRM 800 Series Assembling And Maintaining Manual

70

Using the Treadmill Safety Clip

The treadmill is equipped with three different stop functions,
which behave as follows:
If the user ...
Pulls on the lanyard
attached to the safety
clip and trips the
restart switch
Presses down on the
red STOP button
Steps off of the
running belt for a
preset amount of
time
The restart switch and the red STOP button are located just
below the console, as shown in the following figure. When the
switch is tripped, the button pops up. The treadmill does not
operate until the button is returned to its normal position.
Figure 36: Restart switch
Assembling and Maintaining TRM 800-Series Treadmills
Then the
treadmill belt ...
Slows to a stop Shows the words PUSH
Slows to a stop Shows that the exercise
Slows to a stop Shows that the exercise
And the console ...
THE RESET SWITCH. On
some console models, an
arrow points toward the
Restart switch.
workout is paused.
workout is paused.