Table of Contents
Advertisement
2. Connecting VelocityKVM T-Series Extenders
All physical connections to the product use industry-standard connectors. Non-supplied cables
are commercially available. All connections are found on the rear of the unit.
2.1 Transmitter Modules
The Transmitter Module connects to the CPU (or other sources) using the supplied cables listed above.
The Transmitter then connects to the Receiver via multi-mode or single-mode fiber-optic cables. (See
paragraph 2.8 Technical Specifications on page 12, for details about specific optical distances using
various fiber types.)
Fiber Optic Ports
L3: Video 2
L2: Data Rx to Tx
L1: Video 1 & Data Tx to Rx
Fiber Connection/
Alarm LEDs
2.2 Receiver Modules
The Receiver Module receives video and KVM data from the Transmitter via multi-mode or single-mode
fiber-optic cables. The Receiver's output ports connect to the destination peripheral devices with their
own standard cables.
Fiber Optic Ports
L3: Video 2
L1: Video 1 & Data Tx to Rx
L2: Data Rx to Tx
Fiber Connection/
Alarm LEDs
T-Series DVI Modules, Rev. G
VTM-24 Multi-Mode Transmitter
3D Stereo IN
DVI Video 1
DVI Video 2
IN
IN
VTM-24 Multi-Mode Receiver
3D Stereo
OUT
DVI Video 1
DVI Video 2
OUT
OUT
Audio OUT
Audio IN
7
thinklogical
®
Audio IN
RS-232 Serial Port (F)
PS2 Mouse from CPU
USB 2.0 Port
USB 2.0 Link/Host
Indicator LEDs
Control Download
Device Download
PS2 Kybd. from CPU
USB HID Port
Audio OUT
RS-232 Serial Port (M)
PS2 to Mouse
USB 2.0 Ports (4)
USB 2.0 Link/Device
Indicator LEDs
Control Download
Host Download
PS2 to Keyboard
USB HID Ports (4)
October, 2016
Advertisement
Table of Contents
