Table of Contents
Advertisement
1.2 Contents: SDI Extender Modules
When you receive your Thinklogical
the following items:
VelocityKVM T-Series Extender Module(s): Transmitter/Receiver/Transceiver
VelocityKVM T-4200 Extender SDI Modules Product Manual CD
Product Quick Start Guide
2. CONNECTING THE T-4200 EXTENDER
All physical connections to the T-4200 Extender use industry-standard connectors. Non-supplied cables
are commercially available. All connections are found on the rear panel of the unit.
2.1 Transmitter Modules
The Transmitter Module connects to the CPU (or other sources) using standard copper cables. The
Transmitter then connects to a Receiver via multi-mode or single-mode fiber-optic cables.
2.2 Receiver Modules
The Receiver Module receives video and KVM data from a Transmitter via multi-mode or single-mode
fiber-optic cables. The Receiver's output ports connect to the destination peripheral devices with their
own standard copper cables.
2.3 Transceiver Modules
The Transceiver Module combines the functions and features of both a Transmitter and a Receiver in
one unit. Each half of the Transceiver module receives the same standard source input, destination
output and fiber-optic cables as half a dual Transmitter or Receiver module (below).
Video Format
Indicator LEDs
RS-422 Serial Port (DB-9F)
SDI Loop OUT
SDI Video IN
L1: Data Tx to Rx & Video
Fiber optic cables
L2: Data Rx to Tx
(See paragraph 2.8 Technical Specifications, on page 12, for details about specific optical distances
using various fiber types.)
T-Series SDI Modules, Rev. A
VelocityKVM T-Series SDI Extender Modules, you should find
®
STM Transceiver Module
ALARM
50Ω BNC
TRANSMIT SIDE
Fiber optic cables
50Ω BNC
RECEIVE SIDE
7
®
FPGA Update Port
RS-422 Serial Port (DB-9M)
Video Format
Indicator LEDs
ALARM
L1: Data Tx to Rx & Video
L2: Data Rx to Tx
SDI Video OUT
SDI Video OUT
September 2011
Advertisement
Table of Contents
