ACME TB-1010QW II User Manual page 9

MANUAL TEST
To select , press the ENTER button to show MANUAL TEST on the display. Use the DOWN/UP
button to select
(strobe) on the display. Once the mode has been selected, press the ENTER button to confirm. Use the
DOWN/UP buttons to specify a value for the chosen effect from 0 to 255. To go back to the functions
without any changes press the MENU button again. Press and hold the MENU button for about one
second or wait for 7 seconds to exit the menu mode.
WHITE BALANCE
To select , press the ENTER button to show WHITE BALANCE on the display. Use the DOWN/UP
button to select
confirm .Use the DOWN /UP buttons to change its value (125 to 255). Once the address has been
selected, press the ENTER button to setup. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the menu mode.
PASSWORD
To select , press the ENTER button to show PASSWORD on the display. Use the DOWN/UP buttons
to change the password (000 to 9999). Once the address has been selected, press the ENTER button to
setup. To go back to the functions without any changes press the MENU button again. Press and hold the
MENU button for about one second or wait for 7 seconds to exit the menu mode.
LOCK
To select , press the ENTER button to show LOCK on the display. Use the DOWN/UP buttons to
select (blackout) or
ENTER button to setup. To go back to the functions without any changes press the MENU button again.
Press and hold the MENU button for about one second or wait for 7 seconds to exit the current mode.
(red), (green),
(red), (green) or
(normal) mode. Once the mode has been selected, press the
(blue), (white),
(blue). Once selected, press the ENTER button to
8A
(dimmer) or