Technical Specifications - ACME TB-1010QW II User Manual

Warning:
 To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
 The housing and lenses must be replaced if they are visibly damaged.
Installation:
The fixture should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating and make sure that the structure to which you are
attaching the unit is secure and is able to support a weight of 10 times of the fixtures weight. Always use
a safety cable that can hold 12 times of the weight of the fixture when installing. The equipment must be
installed by professionals and it must be installed in a place where is out of the reach of people and no
one can pass by or under it.

2. Technical Specifications

 Power Supply:
 Power Consumption:
 Power Cable Daisy Chains:
 Light Source:
 Beam Angle:
 Weight:
 Dimension:
AC 100~240V, 50/60Hz
130W
18 Fixtures Max. (230V, 50Hz)
10 Fixtures Max. (120V, 60Hz)
10×15W RGBW LEDs
10°
10Kgs
953 × 104 × 112mm
3A
104 mm