ACME TB-1010QW II User Manual page 10

DISPLAY INVERSE
To select , press the ENTER button to show DISPLAY INVERSE on the display, and press the ENTER
button again, it will show the
the MENU button.
AUTO TEST
To select , press the ENTER button to show AUTO TEST on the display and the unit will run a
self-test . To go back to the functions without any changes press the MENU button again. Press and hold
the MENU button for about one second or wait for 7 seconds to exit the current mode.
LED DISPLAY
To select , press the ENTER button to show LED DISPLAY on the display. Use the DOWN/UP button
to select (LED on) or
ENTER buttons to setup. To go back to the functions without any changes press the MENU button again.
Press and hold the MENU button for about one second or wait for 7 seconds to exit the current mode.
FIXTURE TEMPERATURE
To select , press the ENTER button to show the FIXTURE TEMPERATURE on the display and the
display will show the temperature of the unit. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the menu mode.
FIXTURE USE HOURS
To select , press the ENTER button to show FIXTURE USE HOURS on the display and the display
will show the number of working hours of the unit . To go back to the functions without any changes
press the MENU button again. Press and hold the MENU button for about one second or wait for 7
(inversion). To go back to the functions without any changes press
(LED off) mode. Once the mode has been selected, press the
9A