Table of Contents
Advertisement
Specifications
1.2 Module dimensions
Module
PDS200
3
ASX-500 sampler
ASX-400 sampler
Reagent pump (12 position)
System unit (5 channels)
SPM
1
Divide dimension by 2.54 to convert to inches.
2
Multiply weight by 2.2 to convert to pounds.
3
Allow an extra 15 cm of height for probe clearance.
1.3 Electrical and environmental specifications
Figure 2 General guide to single phase voltage and frequencies worldwide
6
Table 1
contains the general dimensions for individual modules. Use
system configuration that differs from the one explained above.
Table 1 Dimensions
1
Width (cm)
12.7
52.5
16
15
70.5
69
Allow a minimum of 10 cm of free space in the back of the instrument and between
modules for cabling and tubing. This extra space also offers easy access to the
system components.
Note: To allow convenient access to the top and rear of the system, avoid putting the system
under shelving.
•
Connect all modules to a surge-protected power strip.
Note: Refer to the back of the modules for the proper requirement.
•
This equipment is intended for use in a laboratory.
•
Use cables and power cords supplied by the manufacturer only.
Figure 2
shows the single phase voltage and frequencies worldwide and
describes the electrical specifications for the instrument modules.
Table 3
describes the environmental specifications for the instrument modules.
1
Depth (cm)
Height (cm)
22.5
46
14
26
71.2
9
Table 1
for any
1
Weight (kg)
23.4
4
25
10
16.5
7.3
13
5.6
26.7
46.5
26
4
Table 2
2
Advertisement
Table of Contents
Troubleshooting
