Lenze 9215 Operating Instructions Manual page 5

How to use these Operating
Instructions...
These Operating Instructions are divided into three parts:
•
Planning and installation
This part comprises the technical data of the supply modules,
the axis modules and of accessories available for the 9200
series (e. g. motors), instructions for installation and wiring and
descriptions of the drive connections.
•
Parameter setting
Describes the basics of parameter setting and informs about
commissioning, important functions and the operation via serial
interface. At the end of this part you will find a comprehensive
code table and a signal flow chart.
•
Service
Explains error messages and gives hints for trouble-shooting.
To locate information on specific topics, simply refer to the table of
contents at the beginning and to the index at the end of the
operating instructions.
A series of different symbols provide quick reference and highlight
important items.
Note
This symbol refers to items of information intended to facilitate
operation.
Caution
Notes which should be observed to avoid possible damage to or
destruction of equipment.
Warning
Notes which should be observed to avoid health risks to the
operating personnel.

Fehler! Es
ist nicht
möglich,
durch die
B b it
1