Siemens milltronics BW500 Instruction Manual page 97

Error Codes
The error codes returned in the format area are 8-bit integers found in the lowest 8 bits of
the format word. This allows for 256 potential error codes.
Currently the BW500 has two error codes available:
Values
0 No error
1 Data not available as percent (available as units)
2-255 Reserved
Date and Time (R41,000 – 41,006)
The date and time can be read or written in registers 41,000 to 41,006 as defined in the
table above.
Example: If you are located in Toronto, Canada and would like to set the date and time to
February 14, 1999, 1:30 p.m. and 42 seconds, you would write the following:
The time zone register is used only as a reference and does not affect the
Note:
operation of the BW500.
7ML19985DK03 Milltronics BW500 – INSTRUCTION MANUAL
Description
Bits Values
R41,000
R41,001
R41,002
R41,003
R41,004
R41,005
R41,006
1999
2
14
13
30
42
-5
Page 91