Communication Settings - MICRO-EPSILON CTVM-1L Instruction Manual

Communication Settings

Serial Interface
Baud rate: 9,6 ... 115,2 kBaud (adjustable on the unit or via software)
Data bits: 8
Parity: none
Stop bits: 1
Flow control: off
Protocol
All sensors of the CTVideo series are using a binary protocol. Alternatively they can be switched to an ASCII
protocol. To get a fast communication the protocol has no additional overhead with CR, LR or ACK bytes.
ASCII protocol
To switch to the ASCII protocol please use the following command:
Decimal: 131
HEX: 0x83
Data, Answer: byte 1
0 – Binary protocol
Result:
1 – ASCII protocol
thermoMETER CTVideo 42